Material Resin

High precision & detailed

About Resin

The resin from Formalize is used in the SLA 3D printing technique. This technique makes it possible to achieve high precision, which means that small details are displayed very well. The resin is made of epoxy, which gives the products that are SLA 3D printed a smooth surface that looks a lot like a product than injection molded.

The material is often used to 3D print high precision parts and miniature objects. Think of figurines, scale models, parts with very small screw thread, etc. It is also possible to make end products and high-quality prototypes with this material because of its smooth appearance. The SLA 3D printed products are completely smooth and there is no need for further post-processing.

The material deforms at approximately 70°C, so our resin is not suitable for high-precision parts that have to resist high temperatures.



Design Guidelines

Volume Maximum volume per part: 120 x 68 x 150 mm Minimum volume per part: X + Y + Z ≥ 0.5 mm
Wall thickness Minimum wall thickness: 0.4 mm
Wire thickness Minimum wire thickness: 0.4 mm
Details embossed Minimum embossed width: 0.4 mm Minimum embossed height: 0.1 mm
Details engraved Minimum width: 0.4 mm Minimum depth: 0.4 mm


The delivery time per order depends on the selected production speed in the configurator. For large orders of tens, hundreds or thousands of pieces, please contact us.

The difference is the layer thickness in which your products are 3D printed. A smaller layer thickness makes details more visible and the model can be smoother.

The layer thickness for standard quality is 0.05mm. The layer thickness for ultra detail quality is 0.035mm.


SLA resin car
SLA resin cars
SLA resin castle
SLA resin castle
SLA resin enclosure
SLA resin grip
SLA resin miniature
SLA resin miniature
SLA resin rocket
SLA resin shapes
SLA resin tanks
SLA resin train